5 Common Split System Air Conditioner Problems And Their Solutions

1. Problem: The split AC does not turn on

Solution:

_ Follow a simple

. Check if there is a power supply to your split system air conditioner. If yes, ensure that the thermostat is set to the ‘cool’ mode. Next, check if all the external wiring is intact, as rats and mice could nibble up wires and disconnect the circuits. The next step is to verify if everything is okay with the electrical wiring of your home. If there are issues with blown fuses or tripping, resetting the power should do the trick. In case all of these fails, your split system air conditioner might have internal issues related to wiring or motors. If that is the case, call for an AC service repair and maintenance from Urban Company.

2. Problem: The AC fan does not work

How to deal with it

:_ If the fan of your split system air conditioner is not working then look for switched off or tripped circuit breaker inside the system. This can prevent the fan from receiving input power even though the unit is switched on. Another reason your AC fan is not working could be a build-up of ice in the internal coils, which obstructs the normal functionality of your split system air conditioner. You need professional help in such cases.

3. Problem: Mold in the air conditioner

How to deal with it:

_ Molds are types of fungi that grow in humid temperatures. Split system air conditioners have ambient temperature which is perfect for their growth. As they can lead to various health issues, it is better to deal with them at the earliest. To solve this split system air conditioner problem, contact an

from Urban Company at the earliest.

4. Problem: The AC does not blow cool air

How to deal with it:

_ There could be split AC problems leading to blowing hot air. The first step in tackling the problem is to make sure that the thermostat is set to a temperature at least 5°C lesser than the room temperature. You can also check for the cooling effect by lowering the temperature further. If there is absolutely no difference in the output even after 15-20 minutes, carefully clean the dirt in the evaporator or condenser. Ensure adequate air supply from the coils and fins of the condenser. The cause might also be a refrigerant leakage, which can be inspected visually. If these measures seem difficult, book an

from Urban Company and get your problem sorted!

5. Problem: The thermostat is broken

How to deal with it:

_ A thermostat is a control unit inside your house, which allows you to set the desired temperature according to your needs. You can usually control air flow through a remote control or through knobs on the device itself. If the thermostat is broken, you cannot regulate the ambient temperature and might end up damaging the split ac unit.