
Post renovation cleaning checklist for your BTO

By Urban Company
6 min read
Nov 15, 2026
A 7-step post renovation cleaning checklist for Singapore BTO flats: ceiling to floor, dry before wet, and the 3 jobs a DIY clean usually misses.
It’s the week after the carpenter finished in your 4-room BTO in Tengah. The sofa arrives on Saturday, every surface has a pale grey film that comes back an hour after you wipe it, and the new tiles look dull. This is the order that gets it done once.
Key takeaways
Clean from the ceiling down, and dry before wet. Renovation dust falls, so vacuum the high surfaces first and mop the floor last, or you will clean it twice.
Vacuum before you wipe. Sweeping and dry dusting throw fine renovation dust back into the air.
Clean after the last contractor leaves, before the furniture arrives. An empty BTO flat is the easiest it will ever be to clean.
Plan a second, lighter wipe-down 3 to 4 days later, once the dust still in the air has settled.
Cement haze on tiles, dust inside carpentry and high L-box tops are the 3 jobs a DIY clean most often misses.
What makes post-renovation cleaning different?
Renovation dust is finer than household dust, and it comes with residue that ordinary cleaning doesn’t shift.
Sanding, hacking and drilling produce particles that hang in the air for days, then settle inside every cabinet, track and ledge. Add cement haze on tiles, paint specks on glass, silicone smears and sawdust in drawer runners. That’s a one-off deep clean, and
deep cleaning and regular cleaning cover different ground.
When should you do the post-renovation clean?
After the last contractor leaves, and before furniture, curtains and appliances go in.
That includes the aircon and curtain installers, because every hole drilled puts fresh dust on surfaces you’ve already cleaned. For a BTO, that’s the window between renovation handover and move-in.
What is the right order for post-renovation cleaning?
Top to bottom, dry before wet: vacuum first, wipe second, mop the floor last.
Step
What to clean
How
1. High surfaces
L-box, ledges, lights
Vacuum, brush head
2. Aircon filters
Filters only
Rinse, dry fully
3. Walls, switches
Frames, power points
Vacuum, damp cloth
4. Carpentry
Inside, plus runners
Vacuum, then wipe
5. Windows
Tracks, frames, glass
Vacuum tracks, wipe
6. Kitchen, bathrooms
Counters, hood, sink
Wipe, clear smears
7. Floors
Every room
Vacuum, mop, de-haze
Why this order: everything above falls onto everything below, and a dusty aircon filter blows dust around the flat the first time it runs. Vacuum before you wipe, because wet-wiping first smears dust into streaks. Keep water away from switches and sockets. Sawdust left in drawer runners ends up on your clothes later, and grit in window tracks scratches the frames when the windows slide. Clean the glass from the inside only.
If a switch or power point was cracked or loosened during the works, don’t fix it yourself:
HDB notes that only a licensed electrician can replace socket outlets.
Don’t lean out of a window to clean the outside of the glass in a high-rise flat, and if a ladder feels unsteady on fresh tiles, stop rather than stretch.
How do you clean fine dust after renovation?
Vacuum it, don’t sweep it.
A broom or feather duster only lifts fine dust into the air, where it settles again.
NEA’s guidelines for cleaning homesalso say to avoid sweeping or dusting floors, so particles aren’t stirred back up. Use a vacuum with a fine filter and a brush attachment, and clean the filter often, as renovation dust clogs it quickly.
Then wipe with a barely damp microfibre cloth, rinsing it often. A wet cloth turns fine dust into a grey paste that dries into streaks. If you already have rugs down, vacuuming carpets and rugs properly takes more passes than usual after a reno. Keep the windows open while you work, and expect some dust to settle over the next few days. That’s what the second wipe-down is for.
How do you clean tiles after renovation?
Vacuum and mop first, then treat any haze that’s left.
Much of the dull film on new tiles is loose dust. What remains is often cement or grout haze, a thin, hard film that looks cloudy again as soon as the floor dries.
Use a haze remover made for your tile type, and test it on a spare tile first.
Work in small sections, scrub, and rinse well.
Never use strong acid on marble, granite or other natural stone. It etches the surface permanently.
Never mix cleaning products. Some combinations release harmful fumes.
What can’t a DIY post-renovation clean reach?
Usually 3 things: cement haze across large floors, fine dust deep in carpentry, and high surfaces.
The rest is a fair DIY job if you have a day and a good vacuum.
Job
Fair DIY?
Why
Walls, doors, switches
Yes
Slow, not technical
Aircon filters
Yes
Coils: a Professional
Window tracks, glass
Yes
Vacuum first, then wipe
Cement haze, whole floor
Hard
Needs a machine scrub
Dust inside carpentry
Hard
Dozens of compartments
L-box tops, high lights
Hard
Ladder work, every room
The honest line: a 2-room flat is a manageable weekend. A 4-room or 5-room BTO after full carpentry is a lot for 1 or 2 people, and most of the effort sits in the “hard” rows.
One thing no clean fixes: the sharp smell of new carpentry is often formaldehyde, a gas, not dust.
NEA notes that formaldehyde may be emitted by some building products. Keep the flat well ventilated while the new carpentry settles in.
If your move-in date is close and the carpentry is extensive, Urban Company Singapore’s Post Renovation Cleaning starts
from $300
, with a 3-man team, industry-grade solutions and an auto-scrubber machine. It is rated 4.58 from 567 reviews.
See post renovation cleaning and book in Singapore.
If your new flat has vinyl or SPC flooring, the renovation dust needs a different method from tiles: here’s
how to clean vinyl flooring without damaging it.
Frequently asked questions
How long after renovation should you clean?
Wait until every contractor, including the carpenter and the aircon installer, has finished, because drilling puts fine dust straight back on every surface. Then do the main clean before your furniture arrives. Plan a second, lighter wipe-down 3 to 4 days later, once the dust still floating in the air has had time to settle.
Can you do post-renovation cleaning yourself?
Partly. Vacuuming, wiping walls and cabinets, cleaning window tracks and washing aircon filters are all fair DIY jobs. The hard parts are cement haze on large tiled floors, fine dust packed into carpentry interiors, and high surfaces like L-box tops. Those take the right products, machines and several people working the flat at once.
How do you remove cement haze from tiles after renovation?
Vacuum and mop first, because much of the dull film is loose dust. If a haze remains, use a remover made for your tile type, test it on a spare tile, and scrub in small sections before rinsing. Never use strong acid on marble or other natural stone, and never mix cleaning products together.
How do you clean fine dust after renovation?
Vacuum before you wipe, using a vacuum with a fine filter and a brush attachment, working from the ceiling down. Then wipe with a barely damp microfibre cloth, rinsing it often. Sweeping and dry dusting only lift fine dust into the air, where it lands again on the surfaces you have just cleaned.
How much is post renovation cleaning in Singapore?
It depends mainly on the size of the flat and how much dust and haze the renovation left behind. At Urban Company Singapore, Post Renovation Cleaning starts from $300, with a 3-man team, industry-grade solutions and an auto-scrubber machine. The service page lists what is included, so you can compare it against your own checklist.
Does post-renovation cleaning remove formaldehyde?
No. Formaldehyde is a gas released by some new carpentry, boards and adhesives, so wiping and vacuuming do not remove it. Cleaning deals with dust and residue. Keeping the flat well ventilated helps, and Urban Company offers a separate Formaldehyde Removal Treatment, from $200, for new wardrobes, cabinets and built-in carpentry.



